The scott spark 960 has a super light alloy frame, as well as a front and rear fork/shock lockout allowing for a more optimized ride. It's lightweight, durable, affordable and retains all the great geometry and ride of its carbon cousins
KEY FEATURES
-
Spark Alloy SL Frame
-
TwinLoc Suspension System
-
Tapered steerer, 15x110mm QR axle, Lockout
-
SCOTT custom w. travel & geo adj., 3 modes, Travel 120-85-Lockout
-
Syncros X-25 TR Rims
-
Syncros Dropper Post and Parts
Tech:
29 Wheels
Improved roll-over is the most noticeable attribute when it comes to 29” wheels. The big wheels are great for rolling over nasty roots and rocky sections, essentially making it easier to ride these conditions. Improved traction is also a key factor with the increased wheel diameter compared to 27.5” wheels as tire contact to the ground is larger.
• Best Roll-Over Performance
• Carries Momentum
• Maximum Traction surface
• Best stability on easy trails
• Lowest suspension stress
• Great for larger frame sizes
• Increase stability on long curve
Asymmetric Design
The Spark down tube shock and linkage are clearly asymmetric, when looking from the top of the bike. Carbon fibres achieve their full potential when used in smooth straight lines. Off setting the shock slightly to the left hand side of the bike gives a clean and continuous structure from the down tube through the shock mount to the main pivot.
Boost Technolgy
Boost is a hub and drivetrain standard developed by SRAM. Boost is built around a wider rear and front hub and enables stiffer wheels due to a wider spoke bracing angle. Boost 148 rear hubs move each flange of the rear hub three millimeters wider.
Boost is designed as a complete system so drivetrain performance isn’t compromised. Even though Boost pushes the cogs three millimeters outboard, the crankarm Q-Factor remains the same as the Boost system’s crankset utilizes front chainrings that sit a corresponding 3mm outward to ensure the required chainline. Boost cranks can onlybe used when paired with a 148mm hub. On the front the hub spacing is increased by 10mm to 110mm. Increased wheel stiffness and greater clearance for bigger tires are the main advantages of Boost technology. On our bikes, we wanted to go beyond the basics and reap all the benefits of this innovation by optimizing frame design and geometry.The 3 mm outboard chain ring adds clearance in the chain stay area that allows a substantial increase of the chain stay tube cross-section. Correspondingly,the stiffness in this part of the frame improves. Also, with a wider range of positions for the rear wheel, the frame geometry can be adjusted. We can shorten the chainstays for more agile handling.
Rocker Link
The Spark carbon linkage is constructed with a compression moulding process. It’s 37g lighter than the aluminium equivalent and half the weight of the previous Spark linkage. Making the link in two pieces means all excess material can be removed from the inside of the linkage,without sacrificing stiffness.
Twinloc Suspension System
With TwinLoc, a rider can effectively control the complete frame, fork, and shock as a system. Why does this matter? A bike with 150mm of suspension travel, correctly set up, has more sag than a bike with 130mm. It's that extra travel that makes it more fun to ride and more capable on the descents, but the greater sag has an oversized effect on the bike's geometry and climbing performance. That's where TwinLoc matters.
TwinLoc helps manage the sag effect in several ways. Whereas most systems only increase low-speed compression in an effort to gain pedaling efficiency, TwinLoc allows us to not only change compression damping, but also to change the spring curve, dynamically altering the geometry of the bike. In Trail mode, the shock is not only firmer, but it has dynamically less travel. The bike sits higher, maintains a steep seat angle for those climbs, and becomes more agile. We also offer a third, full lockout mode for going up in the most efficient manner possible.
These unique settings optimize climbing geometry, even on longer travel bikes. We can eliminate the "long travel effect" that can rob your pedaling efficiency, but we're not robbing you of the full-fun, 150mm travel when you point it downhill. From a race setting, to a lunch ride, to an after work trail shred, being able to switch from mode to mode depending on a trails profile at the push of a lever is paramount to riding faster and having a damned good time.
ICCR Cable Routing
On the Scale, Spark and Genius, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut.